![]() It's distinctly possible I'm missing something too, but I don't know.Īdmittedly, I'm not very knowledgeable about lighting, and our setup is very basic, but I thought this feedback might help make the lighting controls the best they can be. I've got a workaround for now, but I'd love to see it work a little more cleanly. This is why it would be helpful to be able to set a cue that doesn't repeat at the beginning of the segment to say turn the lights off and a cue at the very end of the segment to turn them on. The more lights you have, the more DMX channels you will need and the more. The same thing happens in our post-service loop. From GrandMA to Onyx, Chroma-Q to LightKey, Chamsys to Hog and many many many. Then it sends the same lighting control again, and on my controller, that causes the lights to toggle back on. If I tell the first slide in that segment to turn the lights off, that works fine.until the loop repeats. I'd like the lighting on the stage to be off during this. For USB DMX applications our compatibility with the Enttec Pro protocol assures compatibility in almost every situation. There are many free and commercial software packages available and by selecting Art-Net or sACN as your DMX device compatibility is guaranteed even with high end lighting consoles. We run an announcement loop before the service begins. USB DMX Art-Net / sACN LED Pixel Control. To use this function, you have to connect your mac to the ethernet switch from the pioneer set and start the ProDJLink and the Lightkey applications. Lightkey is a professional lighting control app for discos, nightclubs, live events, and more. Here's the reason that would be helpful for me. With ProDJLink you are able to synchronize your Pioneer set to Lightkey using the built-in MIDI beat clock. Second, I would love to see this functionality be standalone (like the record start/stop cues) as opposed to being under the signals tab of a given slide. ![]() It seems like it could solve the problem I'm having (detailed below), but I'm not sure, as it doesn't seem to do anything for me. It doesn't appear to do anything, but there's no documentation to tell me what it's supposed to do. For example, I have been unable to figure out what the checkbox for "fire for each slide" means. There is a single webpage that gives a brief overview, but the information is fairly scant. I thought I would share a couple of things I noticed that might be helpful.įirst, there isn't really any documentation. I saw that Proclaim now has the ability to send lighting cues via MIDI and thought that might be a nice thing to have automated for our multimedia guys (we have a very simple lighting setup and a simple controller, a Chauvet Obey 70).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |